beat error is a bit high at 0.7ms, as it can be easily adusted
one case clamp and screw not original
one case clamp and screw missing
there shouldn't be a dial washer on the hour wheel
dirt in fourth wheel jewel
fibre on third wheel
taking the canon pinion apart
canon pinion taken apart and outer part tightened
canon pinion tightened and put back together
the second hand tube needs a bit of a tightening
I removed the little dirt spot on the left of the two o'clock marker and lightly polished the hands
movement cased with two case clamps and screws
lots of dirt on case back and gasket
the case back needs a flat rubber gasket, not an O-ring as was in there
beat error and beat rate adjusted
ready for testing