The lovely Rolex came all the way from New York City, and Steve sent it over. The crown thread is so damaged that the crown doesn’t screw down any more, and the watch needs a service, a case and bracelet polish, and a new crystal. Onwards and upwards …
The amplitude is a bit feeble, and the watch is too fast.
As usual, there is quite a bit of dirt under the bezel.
The hands and dial are still in good condition.
Nicely decorated bottom plate, with the cap jewels for the balance and escape wheel visible.
In this photo, I have already removed the cap jewels.
Lots of old grease in the mainspring barrel.
And off into the cleaning machine.
The cap jewels, escape wheel and pallet fork are epilame treated.
All the parts ready for reassembly.
I start off with the cap jewels.
Then, I put the gear train in.
The new original Rolex mainspring.
And the movement is ticking again.
That’s looking very good indeed.
And the second hand arbor and driving wheel are mounted.Now I can put the dial and hands on.
Charles has polished the case, bezel and bracelet, and has put a new crystal in.
The new crown arrives. Rolex original, and a proud £175!
The case back gets a new gasket, too.
And the watch is back to its old glory.
Very nice indeed.The bracelet looks as good as new, too.
Hello there,
This is an older post – I realize.
I have just the watch described here with a presumably broken shaft of the balance.
Could you possibly accept repair of this watch? Word around is there are no replacement parts available by any chance…
Appreciate any reply.
Best wishes
Hi, do you still have glass for this watch?
Try cousinsuk.com
Can you get a new speedking dial
No 😉
What do you charge to refurbish a rolex like the one on this article….i have a 6430 speedking in similar condition the crown is good though…lol
Hello,
I try to find a geniun dial Rolex Oyster Speedking Ref. 6430, mid-size 30mm for replace my watch.If you have a spare part of Dial (Black or white) I would like to have for replace my watch.
Thank you in advance
Woravit Ph.
sorry, we don’t have that dial
Hi Christian,
Very pleased to see a new post, as always. May I ask why the mainspring goes in the cleaning machine if you are going to replace the spring anyway?
Benjamin
Just a habit of mine, and others have pointed this out before. My bin is full of clean mainsprings 😉
I always clean the mainspring with the parts, as sometimes, I can’t get hold of a new one.
Don’t bin them – steel is worth nearly 10p kilo a these days 😉
Best not rely on that as a source of income then…..
Wonderful to know you are back in business- live long and prosper good sir
I love an old Rolex… very few of the modern ones do much for me 😉
How would the thread in the crown have been damaged? I would have thought / hoped the thread on the pendant tube would go first…
They were actually both damaged. The crown was worse, but I had to change the pendant tube as well.
Hi Christian. I love reading your blog and I’m always excited to see a new entry.
I was wondering what sort of detail you go into with your client before servicing and partially restoring a higher value piece like this where value is highly dependent on originality and the condition of hands and dial. In past entries you’ve given hands that show some ageing a light polish (and these hands could perhaps have been a candidate given that the case was also being polished), but I assume you wouldn’t do so unless instructed by the client.
While I can discuss such things with my watch maker face-to-face, you have the added complication of distance and sometimes language barriers to deal with.
A future entry on the type of discussion you have had with a client about their options would perhaps be interesting to your readers.
Cheers,
Tristan
Hi Tristan,
A project like this one will have a trail of 30-odd emails, and I discuss pretty much every detail of the work carried out with my clients. This includes photos whilst I’m working on the watch, discussions about what parts to use, and often clients are involved in sourcing parts, too.
The hands of this Rolex actually got a light polish, too.
It might actually be the other way around. If you give your watch to your local watchmaker, you have your 15 or 20 minutes discussing the work carried out, and the next step is the finished result. My clients and I are in pretty much constant communication whilst I work on their watches, and decisions are changed half-way, or we explore one avenue, and then decide to go down another. It’s a very interactive process.
Best regards,
Christian
You’re quite right Christian, I have a discussion with my watchmaker abouth what I’d like done and then I get a call when the job is done. Although we might discuss any parts he had to replace, it’s not the sort of detailed breakdown that you give your clients. I think that’s why your readers love your blog – it gives us some insight into the workings of our wonderful little machines and the work that goes into servicing and repairing them.
Thanks for the insight into your communication with your clients.
Tristan
Excellent job Christian, they’ve done a great job on the case. Who do you get to do case work?
If I was ever to have a Rolex, I think it would have to be a Speedking like this…
I use Charles from Watch Glass Cutting in Abergavenny.
Cheers, i’ll keep that in mind when I next feel out of my depth…
great job, I love those old rivet style bracelets, cracking watch by the way, sure the owner will be highly delighted when they get it back in that condition.