This Geneve belongs to Neil. The second hand is missing, and it needs a service.
I get very lucky, and Cousins actually have the original Omega hand that’s missing!
The 1012 looks very similar to the 1020, with only minor differences.
The dial could be in better condition, but it’s not bad considering the age of the watch.
The bottom plate.
The wheel train. The little white plastic on the left is to stop the balance when the crown is pulled out fully for the hacking second feature. Odd that somebody felt compelled to scribble on the auto-winder bridge…
All parts ready for the cleaning machine.
A new mainspring goes in.
The movement comes back together.
Top plate together and balance swinging.
The setting mechanism on the bottom plate.
The new second hand looks pretty good!
Now I can case the movement.
There was no gasket in the case back, and I put in a new one.
Back to its old glory.
Neil sent a new bracelet to fit, as the current one is too short for him. Looking good!
Se quando gira la corona per cambiare l’ora girano poco e sento che sgrana cosa conviene cambiare , i pignon- coulant e la leva con la ruota a stella in punta ( che sopra cambia la data e la ruota sotto ingrana col pignone) che fa ruotare il treno delle ruote ore e minuti ?
Sorry, but I don’t understand Italian.
Hi. The ‘wig-wag wheel’ Should it be held agaiinst the ratchet wheel at rest, or away from it? Both options make sense, and looking through pictures online I can see examples of both. I like the idea of minimum resistance to the auto wind, but dint like tye feeling of the teeth emgaging when hand winding (I have mine in the ‘held away’ position. Thanks for amy input or thoughts š Ed.
Hi Ed, the spring must hold the wig-wag wheel against the ratchet wheel otherwise it cannot engage for hand-winding
why is it that when I rotate the day/date the calendar corrector does not work?
Something is broken?
I have a 1974 Omega GenĆØve Automatic (1012 mechanism). Alas, the mechanism has rusted up after seawater leaked in. I am advised it needs an entire new mechanism. Any advice.
Sell what’s left on eBay.
Are you able to give me some info regarding:
– What lubricant did you use for your 1012? Can I use one lubricant on all parts include the balance wheel stem?
– How to regulate the balance wheel on 1015? I have a timegrapher at home
Thank you.
Hmmm – do you really want to start your new hobby on an Omega? I suggest you buy a cheaper watch first to try your skills on.
You need different lubricants – one for the balance and escape wheel, one for the gear train, two for the mainspring, …
Hi Christian,
Great job! I just removed a 1012 calibre from a 116 0163 case (slightly different lugs and silver dial) however the movement seems to be a tiny bit lose in the case. Do you remember if there are there any mounting tabs or screw that keep it tight in the case?
Cheers
Adam
Hi Adam,
You should be able to tell from the case if it needs case clamps and screws, e.g. there is space to fit them.
Do you have the lens for this model please, if so price inc, post to 5048 South Australia.
Alan,
I’m afraid I’m not a parts dealer, and have very limited stock. Everything I have is listed at http://watchparts.org.uk/
Christian
What bezel gasket is used to snap it to case?
From what I remember, there is no bezel gasket, but the watch has a tension ring acrylic crystal.
Beautiful! I have a calibre 1012 omega as well and i’m looking to remove the movement and dial ( seconds hand has fallen off š ), however i’m an utter amateur to the watch scene, and i’ve removed the caseback, but i’m having trouble removing the movement and dial, could you provide some jnsight jnto how you remove the 1012 movement and dial? Much appreciated! Nice watch btw š
Morgan,
Shouldn’t you practise this with a cheap watch? This won’t end well, and my suggestion is to close the case back, and to give the watch to someone who knows what they are doing.
Best regards,
Christian
Hombre, a mi me parece muy bien lo que quiere hacer, algĆŗn dĆa hay que empezar y yo le veo mucho interĆ©s. Adelante con mucho cuidado y finura. !!!!La pieza se lo mereceĀ”Ā”Ā”Ā”
The Geneva hasnāt worked for 25 years. It will be great to see it fully restored.
I will also need a crystal and a new strap. Any info on where to obtain would be great. When Iām done Iāll post a vid so you can see what your tutoring has achieved. Cheers
Try cousinsuk.com
Neil? Where did I get that from. Sorry Christian my last comment re E wheel is to you. ?
Hi Neil
Thanks for the 1012 tear down rebuild. Brill. Iāve copied to a T to clean up a Geneva cal. Now Iām ready to reassemble. Only think is the escape wheel is missing. Do you know where I can obtain an escape wheel?
Hey Steve, did you remove the dial on your 1012…? I want to do the same and replace, please let me know if you have any instructions.
Cheers!
John
Hi
Hi, Im looking to replace the dial on my cal 1012 and am just wondering if other cal. dials would be compatible. If so which in particular? thanks for your advice.
Hello. As an engineer I found this procedure very interesting but would not attempt a service on my 1012 which I purchased new in 1978. and have to find a place to do it as it stops once a day at a non specified time in the night, it keeps good time, but the date change does not work.
What i really want to know is, on the procedure of yours I watched, at what stage do you lubricate the movement and how, do you have an oil mixed with an agent which flashes off to give a v thin coat everywhere?
thank you.
We lubricate as we go along. Only some parts are epilame treated.
Hi, Christian, I just purchased a very clean watch with this movement. Do you know when Omega started using it? Really enjoy your Youtube vids!
Thx
Hi Lauren,
Check the serial number of your movement, and then compare it to a list of serial numbers to years of manufacture – just google for “Omega serial number year”.
Hello Christian,
Can I ask you if I can use the First picture of your post (front face Omega 1012) because I just serviced one but I dont have a correct picture of the watch…
I have the pictures of the work š
Regards,
Ćric.
Sure, no problem.
Many thx…
When done, I’ll give you the URL !
Hello,
Nice job !
I just serviced the same Omega 1012 and I have a couple of questions :
– is this calibre 1012 manual winding (in complement of automatic winding) ?
– Have you a picture of the wheels that are normally on the stem (pignon de remontoir et pignon coulant) ?
Many thx for your reply !
Eric.
Hi Eric,
Yes, you can manually wind the watch as well. I guess you want a photo of the winding pinion and the clutch wheel – you can see those if you enlarge http://watchguy.co.uk/wp-content/uploads/2012/11/IMG_5682-1024×768.jpg
Best regards,
Christian
Hello Christian,
Thx for the picture and for the information.
In fact the winding pinion I’ve found in the watch is not the right one š
So I have to find one…
Regards,
Eric.
Here my job : http://www.horlogerie.studiocactus.net/?page_id=678
š
Looks great , Thanks Christian
More graffiti on an Omega movement… and such a nice looking movement!